GECO TILEBOND PLUS can be used:
- For fixing vitrified tiles, natural stones and granites
- On both walls and floors
- In both internal and external areas, including wet areas like bathrooms, showers & swimming pools
- For tile-on-tile application
GECO TILEBOND PLUS
Highly Polymer Modified Tile & Stone Adhesive
GECO TILEBOND PLUS is a highly polymer-modified cementitious adhesive suitable for fixing tiles & stones. TILEBOND PLUS replaces the traditional thick bed process with thin bed that allows tiles & stones to be laid more easily and faster. The advanced polymers deliver superior adhesion, and its selfcuring properties doesn’t leave air pockets resulting in stronger anchoring of tiles & stones. TILEBOND PLUS conforms to IS 15477:2004 Type 2.
Features
Description
Additional information
| Appearance | Cement grey powder |
|---|---|
| Mixing Ratio | 1 (Water) : 3 (TILEBOND PLUS) |
| Bed Thickness | 2 to 6 mm |
| Pot Life | 1 hour* |
| Open Time | 45 mins.* |
| Adjustability | 50 mins. * |
| Foot traffic/ grouting | After 24 hours |
| Coverage | 3.5 sq.ft./kg at 3 mm bed thickness* |
| 1 | *Pot life, open time, adjustability & coverage will vary depending on service and surface conditions. |
Application Procedure
- Sufficiently flatten the substrate without undulations and clean thoroughly.
- Gradually add TILEBOND PLUS to water as per the prescribed mixing ratio and mix until a workable paste is obtained. The total quantity of water may be slightly adjusted to achieve the required consistency.
- After mixing, allow the paste to stand for 2 minutes for it to mature.
- Apply the adhesive over the surface and comb with a notched side of the trowel to achieve a uniform thickness of 2 to 3 mm.
- Place the tiles firmly on the adhesive bed with a twisting motion, ensuring good initial bonding and eliminating the possibility of any air voids.
- Joint grouting can commence after 24 hours with GECO JOINTFILL.
